Model Number: 6-30 blower Brand Name: Tong Tian Key Specifications/Special Features: 6-30 type centrifugal fan is generally used for granular or powder materials pneumatic transportation, is often used for lining without corrosive gas, no air containing viscous materialMedium temperature is generally not more than 50℃ (highest do not exceed 80℃), the dust content in the medium and hard particle is not more than 150mg/m afterBecause of its high pressure and flow rate is small, so for some objects such as grain, cotton quality lighter transport has very good effect6-30 type centrifugal fan for single suction, number (there are number 5 a, 6 a, 5 c, 6, 7, 8, 9 c c c c seven, fan can be made into spin to divided into left and right two, the distinguish method is that, from the transmission direction of impeller in the face, the fan impeller clockwise while working for a right-handed and vice is left-handedOutlet direction of the fan are usually made from 90 degree to facilitate client installation, debugging, and at the same time the supply of steel structure overall stents and vibration reductionFan impeller diameter of decimeter number is the number of fan, expressed with Arabic numeralsImmediately after the letters fan mode of transmission, transmission methods commonly used are: "A" type, said with A motor to drive straight league (impeller is installed on the motor shaft)"C" type, said fan cantilever, pulley drive on the outside of the bearing"D" type, said fan bracket, support, coupling transmission rpm kW m/h Pa 5A 2900 Y132S1-2-5.5 2240-3325 4375-4150 Y132S2-2-7.5 3686-4770 3933-3217 1450 Y90L-4-1.5 1120-2388 1099-804 6A 2900 Y160M2-2-15 3870-6373 6317-5670 Y160L-2-18.5 6999-8250 5464-4630 1450 Y100L2-4-3 1935-4125 1579-1158 6C 2400 Y160M-4-11 3204-6830 4325-3168 2200 Y132M-4-7.5 2937-6261 3638-2667 2000 Y132S-4-5.5 2670-5962 3011-2207 1800 Y112M-4-4 2403-5123 2442-1785 7C 2020 Y160M2-2-15 4282-9129 4178-3060 1840 Y160M1-2-11 3900-8316 3462-2540 1680 Y132S2-7.5 3562-7592